D7net
Home
Console
Upload
information
Create File
Create Folder
About
Tools
:
/
usr
/
src
/
linux-headers-5.4.0-216
/
include
/
linux
/
Filename :
mod_devicetable.h
back
Copy
/* SPDX-License-Identifier: GPL-2.0 */ /* * Device tables which are exported to userspace via * scripts/mod/file2alias.c. You must keep that file in sync with this * header. */ #ifndef LINUX_MOD_DEVICETABLE_H #define LINUX_MOD_DEVICETABLE_H #ifdef __KERNEL__ #include <linux/types.h> #include <linux/uuid.h> typedef unsigned long kernel_ulong_t; #endif #define PCI_ANY_ID (~0) /** * struct pci_device_id - PCI device ID structure * @vendor: Vendor ID to match (or PCI_ANY_ID) * @device: Device ID to match (or PCI_ANY_ID) * @subvendor: Subsystem vendor ID to match (or PCI_ANY_ID) * @subdevice: Subsystem device ID to match (or PCI_ANY_ID) * @class: Device class, subclass, and "interface" to match. * See Appendix D of the PCI Local Bus Spec or * include/linux/pci_ids.h for a full list of classes. * Most drivers do not need to specify class/class_mask * as vendor/device is normally sufficient. * @class_mask: Limit which sub-fields of the class field are compared. * See drivers/scsi/sym53c8xx_2/ for example of usage. * @driver_data: Data private to the driver. * Most drivers don't need to use driver_data field. * Best practice is to use driver_data as an index * into a static list of equivalent device types, * instead of using it as a pointer. */ struct pci_device_id { __u32 vendor, device; /* Vendor and device ID or PCI_ANY_ID*/ __u32 subvendor, subdevice; /* Subsystem ID's or PCI_ANY_ID */ __u32 class, class_mask; /* (class,subclass,prog-if) triplet */ kernel_ulong_t driver_data; /* Data private to the driver */ }; #define IEEE1394_MATCH_VENDOR_ID 0x0001 #define IEEE1394_MATCH_MODEL_ID 0x0002 #define IEEE1394_MATCH_SPECIFIER_ID 0x0004 #define IEEE1394_MATCH_VERSION 0x0008 struct ieee1394_device_id { __u32 match_flags; __u32 vendor_id; __u32 model_id; __u32 specifier_id; __u32 version; kernel_ulong_t driver_data; }; /* * Device table entry for "new style" table-driven USB drivers. * User mode code can read these tables to choose which modules to load. * Declare the table as a MODULE_DEVICE_TABLE. * * A probe() parameter will point to a matching entry from this table. * Use the driver_info field for each match to hold information tied * to that match: device quirks, etc. * * Terminate the driver's table with an all-zeroes entry. * Use the flag values to control which fields are compared. */ /** * struct usb_device_id - identifies USB devices for probing and hotplugging * @match_flags: Bit mask controlling which of the other fields are used to * match against new devices. Any field except for driver_info may be * used, although some only make sense in conjunction with other fields. * This is usually set by a USB_DEVICE_*() macro, which sets all * other fields in this structure except for driver_info. * @idVendor: USB vendor ID for a device; numbers are assigned * by the USB forum to its members. * @idProduct: Vendor-assigned product ID. * @bcdDevice_lo: Low end of range of vendor-assigned product version numbers. * This is also used to identify individual product versions, for * a range consisting of a single device. * @bcdDevice_hi: High end of version number range. The range of product * versions is inclusive. * @bDeviceClass: Class of device; numbers are assigned * by the USB forum. Products may choose to implement classes, * or be vendor-specific. Device classes specify behavior of all * the interfaces on a device. * @bDeviceSubClass: Subclass of device; associated with bDeviceClass. * @bDeviceProtocol: Protocol of device; associated with bDeviceClass. * @bInterfaceClass: Class of interface; numbers are assigned * by the USB forum. Products may choose to implement classes, * or be vendor-specific. Interface classes specify behavior only * of a given interface; other interfaces may support other classes. * @bInterfaceSubClass: Subclass of interface; associated with bInterfaceClass. * @bInterfaceProtocol: Protocol of interface; associated with bInterfaceClass. * @bInterfaceNumber: Number of interface; composite devices may use * fixed interface numbers to differentiate between vendor-specific * interfaces. * @driver_info: Holds information used by the driver. Usually it holds * a pointer to a descriptor understood by the driver, or perhaps * device flags. * * In most cases, drivers will create a table of device IDs by using * USB_DEVICE(), or similar macros designed for that purpose. * They will then export it to userspace using MODULE_DEVICE_TABLE(), * and provide it to the USB core through their usb_driver structure. * * See the usb_match_id() function for information about how matches are * performed. Briefly, you will normally use one of several macros to help * construct these entries. Each entry you provide will either identify * one or more specific products, or will identify a class of products * which have agreed to behave the same. You should put the more specific * matches towards the beginning of your table, so that driver_info can * record quirks of specific products. */ struct usb_device_id { /* which fields to match against? */ __u16 match_flags; /* Used for product specific matches; range is inclusive */ __u16 idVendor; __u16 idProduct; __u16 bcdDevice_lo; __u16 bcdDevice_hi; /* Used for device class matches */ __u8 bDeviceClass; __u8 bDeviceSubClass; __u8 bDeviceProtocol; /* Used for interface class matches */ __u8 bInterfaceClass; __u8 bInterfaceSubClass; __u8 bInterfaceProtocol; /* Used for vendor-specific interface matches */ __u8 bInterfaceNumber; /* not matched against */ kernel_ulong_t driver_info __attribute__((aligned(sizeof(kernel_ulong_t)))); }; /* Some useful macros to use to create struct usb_device_id */ #define USB_DEVICE_ID_MATCH_VENDOR 0x0001 #define USB_DEVICE_ID_MATCH_PRODUCT 0x0002 #define USB_DEVICE_ID_MATCH_DEV_LO 0x0004 #define USB_DEVICE_ID_MATCH_DEV_HI 0x0008 #define USB_DEVICE_ID_MATCH_DEV_CLASS 0x0010 #define USB_DEVICE_ID_MATCH_DEV_SUBCLASS 0x0020 #define USB_DEVICE_ID_MATCH_DEV_PROTOCOL 0x0040 #define USB_DEVICE_ID_MATCH_INT_CLASS 0x0080 #define USB_DEVICE_ID_MATCH_INT_SUBCLASS 0x0100 #define USB_DEVICE_ID_MATCH_INT_PROTOCOL 0x0200 #define USB_DEVICE_ID_MATCH_INT_NUMBER 0x0400 #define HID_ANY_ID (~0) #define HID_BUS_ANY 0xffff #define HID_GROUP_ANY 0x0000 struct hid_device_id { __u16 bus; __u16 group; __u32 vendor; __u32 product; kernel_ulong_t driver_data; }; /* s390 CCW devices */ struct ccw_device_id { __u16 match_flags; /* which fields to match against */ __u16 cu_type; /* control unit type */ __u16 dev_type; /* device type */ __u8 cu_model; /* control unit model */ __u8 dev_model; /* device model */ kernel_ulong_t driver_info; }; #define CCW_DEVICE_ID_MATCH_CU_TYPE 0x01 #define CCW_DEVICE_ID_MATCH_CU_MODEL 0x02 #define CCW_DEVICE_ID_MATCH_DEVICE_TYPE 0x04 #define CCW_DEVICE_ID_MATCH_DEVICE_MODEL 0x08 /* s390 AP bus devices */ struct ap_device_id { __u16 match_flags; /* which fields to match against */ __u8 dev_type; /* device type */ kernel_ulong_t driver_info; }; #define AP_DEVICE_ID_MATCH_CARD_TYPE 0x01 #define AP_DEVICE_ID_MATCH_QUEUE_TYPE 0x02 /* s390 css bus devices (subchannels) */ struct css_device_id { __u8 match_flags; __u8 type; /* subchannel type */ kernel_ulong_t driver_data; }; #define ACPI_ID_LEN 9 struct acpi_device_id { __u8 id[ACPI_ID_LEN]; kernel_ulong_t driver_data; __u32 cls; __u32 cls_msk; }; #define PNP_ID_LEN 8 #define PNP_MAX_DEVICES 8 struct pnp_device_id { __u8 id[PNP_ID_LEN]; kernel_ulong_t driver_data; }; struct pnp_card_device_id { __u8 id[PNP_ID_LEN]; kernel_ulong_t driver_data; struct { __u8 id[PNP_ID_LEN]; } devs[PNP_MAX_DEVICES]; }; #define SERIO_ANY 0xff struct serio_device_id { __u8 type; __u8 extra; __u8 id; __u8 proto; }; struct hda_device_id { __u32 vendor_id; __u32 rev_id; __u8 api_version; const char *name; unsigned long driver_data; }; struct sdw_device_id { __u16 mfg_id; __u16 part_id; kernel_ulong_t driver_data; }; /* * Struct used for matching a device */ struct of_device_id { char name[32]; char type[32]; char compatible[128]; const void *data; }; /* VIO */ struct vio_device_id { char type[32]; char compat[32]; }; /* PCMCIA */ struct pcmcia_device_id { __u16 match_flags; __u16 manf_id; __u16 card_id; __u8 func_id; /* for real multi-function devices */ __u8 function; /* for pseudo multi-function devices */ __u8 device_no; __u32 prod_id_hash[4]; /* not matched against in kernelspace */ const char * prod_id[4]; /* not matched against */ kernel_ulong_t driver_info; char * cisfile; }; #define PCMCIA_DEV_ID_MATCH_MANF_ID 0x0001 #define PCMCIA_DEV_ID_MATCH_CARD_ID 0x0002 #define PCMCIA_DEV_ID_MATCH_FUNC_ID 0x0004 #define PCMCIA_DEV_ID_MATCH_FUNCTION 0x0008 #define PCMCIA_DEV_ID_MATCH_PROD_ID1 0x0010 #define PCMCIA_DEV_ID_MATCH_PROD_ID2 0x0020 #define PCMCIA_DEV_ID_MATCH_PROD_ID3 0x0040 #define PCMCIA_DEV_ID_MATCH_PROD_ID4 0x0080 #define PCMCIA_DEV_ID_MATCH_DEVICE_NO 0x0100 #define PCMCIA_DEV_ID_MATCH_FAKE_CIS 0x0200 #define PCMCIA_DEV_ID_MATCH_ANONYMOUS 0x0400 /* Input */ #define INPUT_DEVICE_ID_EV_MAX 0x1f #define INPUT_DEVICE_ID_KEY_MIN_INTERESTING 0x71 #define INPUT_DEVICE_ID_KEY_MAX 0x2ff #define INPUT_DEVICE_ID_REL_MAX 0x0f #define INPUT_DEVICE_ID_ABS_MAX 0x3f #define INPUT_DEVICE_ID_MSC_MAX 0x07 #define INPUT_DEVICE_ID_LED_MAX 0x0f #define INPUT_DEVICE_ID_SND_MAX 0x07 #define INPUT_DEVICE_ID_FF_MAX 0x7f #define INPUT_DEVICE_ID_SW_MAX 0x10 #define INPUT_DEVICE_ID_PROP_MAX 0x1f #define INPUT_DEVICE_ID_MATCH_BUS 1 #define INPUT_DEVICE_ID_MATCH_VENDOR 2 #define INPUT_DEVICE_ID_MATCH_PRODUCT 4 #define INPUT_DEVICE_ID_MATCH_VERSION 8 #define INPUT_DEVICE_ID_MATCH_EVBIT 0x0010 #define INPUT_DEVICE_ID_MATCH_KEYBIT 0x0020 #define INPUT_DEVICE_ID_MATCH_RELBIT 0x0040 #define INPUT_DEVICE_ID_MATCH_ABSBIT 0x0080 #define INPUT_DEVICE_ID_MATCH_MSCIT 0x0100 #define INPUT_DEVICE_ID_MATCH_LEDBIT 0x0200 #define INPUT_DEVICE_ID_MATCH_SNDBIT 0x0400 #define INPUT_DEVICE_ID_MATCH_FFBIT 0x0800 #define INPUT_DEVICE_ID_MATCH_SWBIT 0x1000 #define INPUT_DEVICE_ID_MATCH_PROPBIT 0x2000 struct input_device_id { kernel_ulong_t flags; __u16 bustype; __u16 vendor; __u16 product; __u16 version; kernel_ulong_t evbit[INPUT_DEVICE_ID_EV_MAX / BITS_PER_LONG + 1]; kernel_ulong_t keybit[INPUT_DEVICE_ID_KEY_MAX / BITS_PER_LONG + 1]; kernel_ulong_t relbit[INPUT_DEVICE_ID_REL_MAX / BITS_PER_LONG + 1]; kernel_ulong_t absbit[INPUT_DEVICE_ID_ABS_MAX / BITS_PER_LONG + 1]; kernel_ulong_t mscbit[INPUT_DEVICE_ID_MSC_MAX / BITS_PER_LONG + 1]; kernel_ulong_t ledbit[INPUT_DEVICE_ID_LED_MAX / BITS_PER_LONG + 1]; kernel_ulong_t sndbit[INPUT_DEVICE_ID_SND_MAX / BITS_PER_LONG + 1]; kernel_ulong_t ffbit[INPUT_DEVICE_ID_FF_MAX / BITS_PER_LONG + 1]; kernel_ulong_t swbit[INPUT_DEVICE_ID_SW_MAX / BITS_PER_LONG + 1]; kernel_ulong_t propbit[INPUT_DEVICE_ID_PROP_MAX / BITS_PER_LONG + 1]; kernel_ulong_t driver_info; }; /* EISA */ #define EISA_SIG_LEN 8 /* The EISA signature, in ASCII form, null terminated */ struct eisa_device_id { char sig[EISA_SIG_LEN]; kernel_ulong_t driver_data; }; #define EISA_DEVICE_MODALIAS_FMT "eisa:s%s" struct parisc_device_id { __u8 hw_type; /* 5 bits used */ __u8 hversion_rev; /* 4 bits */ __u16 hversion; /* 12 bits */ __u32 sversion; /* 20 bits */ }; #define PA_HWTYPE_ANY_ID 0xff #define PA_HVERSION_REV_ANY_ID 0xff #define PA_HVERSION_ANY_ID 0xffff #define PA_SVERSION_ANY_ID 0xffffffff /* SDIO */ #define SDIO_ANY_ID (~0) struct sdio_device_id { __u8 class; /* Standard interface or SDIO_ANY_ID */ __u16 vendor; /* Vendor or SDIO_ANY_ID */ __u16 device; /* Device ID or SDIO_ANY_ID */ kernel_ulong_t driver_data; /* Data private to the driver */ }; /* SSB core, see drivers/ssb/ */ struct ssb_device_id { __u16 vendor; __u16 coreid; __u8 revision; __u8 __pad; } __attribute__((packed, aligned(2))); #define SSB_DEVICE(_vendor, _coreid, _revision) \ { .vendor = _vendor, .coreid = _coreid, .revision = _revision, } #define SSB_ANY_VENDOR 0xFFFF #define SSB_ANY_ID 0xFFFF #define SSB_ANY_REV 0xFF /* Broadcom's specific AMBA core, see drivers/bcma/ */ struct bcma_device_id { __u16 manuf; __u16 id; __u8 rev; __u8 class; } __attribute__((packed,aligned(2))); #define BCMA_CORE(_manuf, _id, _rev, _class) \ { .manuf = _manuf, .id = _id, .rev = _rev, .class = _class, } #define BCMA_ANY_MANUF 0xFFFF #define BCMA_ANY_ID 0xFFFF #define BCMA_ANY_REV 0xFF #define BCMA_ANY_CLASS 0xFF struct virtio_device_id { __u32 device; __u32 vendor; }; #define VIRTIO_DEV_ANY_ID 0xffffffff /* * For Hyper-V devices we use the device guid as the id. */ struct hv_vmbus_device_id { uuid_le guid; kernel_ulong_t driver_data; /* Data private to the driver */ }; /* rpmsg */ #define RPMSG_NAME_SIZE 32 #define RPMSG_DEVICE_MODALIAS_FMT "rpmsg:%s" struct rpmsg_device_id { char name[RPMSG_NAME_SIZE]; }; /* i2c */ #define I2C_NAME_SIZE 20 #define I2C_MODULE_PREFIX "i2c:" struct i2c_device_id { char name[I2C_NAME_SIZE]; kernel_ulong_t driver_data; /* Data private to the driver */ }; /* pci_epf */ #define PCI_EPF_NAME_SIZE 20 #define PCI_EPF_MODULE_PREFIX "pci_epf:" struct pci_epf_device_id { char name[PCI_EPF_NAME_SIZE]; kernel_ulong_t driver_data; }; /* i3c */ #define I3C_MATCH_DCR 0x1 #define I3C_MATCH_MANUF 0x2 #define I3C_MATCH_PART 0x4 #define I3C_MATCH_EXTRA_INFO 0x8 struct i3c_device_id { __u8 match_flags; __u8 dcr; __u16 manuf_id; __u16 part_id; __u16 extra_info; const void *data; }; /* spi */ #define SPI_NAME_SIZE 32 #define SPI_MODULE_PREFIX "spi:" struct spi_device_id { char name[SPI_NAME_SIZE]; kernel_ulong_t driver_data; /* Data private to the driver */ }; /* SLIMbus */ #define SLIMBUS_NAME_SIZE 32 #define SLIMBUS_MODULE_PREFIX "slim:" struct slim_device_id { __u16 manf_id, prod_code; __u16 dev_index, instance; /* Data private to the driver */ kernel_ulong_t driver_data; }; #define APR_NAME_SIZE 32 #define APR_MODULE_PREFIX "apr:" struct apr_device_id { char name[APR_NAME_SIZE]; __u32 domain_id; __u32 svc_id; __u32 svc_version; kernel_ulong_t driver_data; /* Data private to the driver */ }; #define SPMI_NAME_SIZE 32 #define SPMI_MODULE_PREFIX "spmi:" struct spmi_device_id { char name[SPMI_NAME_SIZE]; kernel_ulong_t driver_data; /* Data private to the driver */ }; /* dmi */ enum dmi_field { DMI_NONE, DMI_BIOS_VENDOR, DMI_BIOS_VERSION, DMI_BIOS_DATE, DMI_SYS_VENDOR, DMI_PRODUCT_NAME, DMI_PRODUCT_VERSION, DMI_PRODUCT_SERIAL, DMI_PRODUCT_UUID, DMI_PRODUCT_SKU, DMI_PRODUCT_FAMILY, DMI_BOARD_VENDOR, DMI_BOARD_NAME, DMI_BOARD_VERSION, DMI_BOARD_SERIAL, DMI_BOARD_ASSET_TAG, DMI_CHASSIS_VENDOR, DMI_CHASSIS_TYPE, DMI_CHASSIS_VERSION, DMI_CHASSIS_SERIAL, DMI_CHASSIS_ASSET_TAG, DMI_STRING_MAX, DMI_OEM_STRING, /* special case - will not be in dmi_ident */ }; struct dmi_strmatch { unsigned char slot:7; unsigned char exact_match:1; char substr[79]; }; struct dmi_system_id { int (*callback)(const struct dmi_system_id *); const char *ident; struct dmi_strmatch matches[4]; void *driver_data; }; /* * struct dmi_device_id appears during expansion of * "MODULE_DEVICE_TABLE(dmi, x)". Compiler doesn't look inside it * but this is enough for gcc 3.4.6 to error out: * error: storage size of '__mod_dmi_device_table' isn't known */ #define dmi_device_id dmi_system_id #define DMI_MATCH(a, b) { .slot = a, .substr = b } #define DMI_EXACT_MATCH(a, b) { .slot = a, .substr = b, .exact_match = 1 } #define PLATFORM_NAME_SIZE 20 #define PLATFORM_MODULE_PREFIX "platform:" struct platform_device_id { char name[PLATFORM_NAME_SIZE]; kernel_ulong_t driver_data; }; #define MDIO_NAME_SIZE 32 #define MDIO_MODULE_PREFIX "mdio:" #define MDIO_ID_FMT "%u%u%u%u%u%u%u%u%u%u%u%u%u%u%u%u%u%u%u%u%u%u%u%u%u%u%u%u%u%u%u%u" #define MDIO_ID_ARGS(_id) \ ((_id)>>31) & 1, ((_id)>>30) & 1, ((_id)>>29) & 1, ((_id)>>28) & 1, \ ((_id)>>27) & 1, ((_id)>>26) & 1, ((_id)>>25) & 1, ((_id)>>24) & 1, \ ((_id)>>23) & 1, ((_id)>>22) & 1, ((_id)>>21) & 1, ((_id)>>20) & 1, \ ((_id)>>19) & 1, ((_id)>>18) & 1, ((_id)>>17) & 1, ((_id)>>16) & 1, \ ((_id)>>15) & 1, ((_id)>>14) & 1, ((_id)>>13) & 1, ((_id)>>12) & 1, \ ((_id)>>11) & 1, ((_id)>>10) & 1, ((_id)>>9) & 1, ((_id)>>8) & 1, \ ((_id)>>7) & 1, ((_id)>>6) & 1, ((_id)>>5) & 1, ((_id)>>4) & 1, \ ((_id)>>3) & 1, ((_id)>>2) & 1, ((_id)>>1) & 1, (_id) & 1 /** * struct mdio_device_id - identifies PHY devices on an MDIO/MII bus * @phy_id: The result of * (mdio_read(&MII_PHYSID1) << 16 | mdio_read(&MII_PHYSID2)) & @phy_id_mask * for this PHY type * @phy_id_mask: Defines the significant bits of @phy_id. A value of 0 * is used to terminate an array of struct mdio_device_id. */ struct mdio_device_id { __u32 phy_id; __u32 phy_id_mask; }; struct zorro_device_id { __u32 id; /* Device ID or ZORRO_WILDCARD */ kernel_ulong_t driver_data; /* Data private to the driver */ }; #define ZORRO_WILDCARD (0xffffffff) /* not official */ #define ZORRO_DEVICE_MODALIAS_FMT "zorro:i%08X" #define ISAPNP_ANY_ID 0xffff struct isapnp_device_id { unsigned short card_vendor, card_device; unsigned short vendor, function; kernel_ulong_t driver_data; /* data private to the driver */ }; /** * struct amba_id - identifies a device on an AMBA bus * @id: The significant bits if the hardware device ID * @mask: Bitmask specifying which bits of the id field are significant when * matching. A driver binds to a device when ((hardware device ID) & mask) * == id. * @data: Private data used by the driver. */ struct amba_id { unsigned int id; unsigned int mask; void *data; }; /** * struct mips_cdmm_device_id - identifies devices in MIPS CDMM bus * @type: Device type identifier. */ struct mips_cdmm_device_id { __u8 type; }; /* * Match x86 CPUs for CPU specific drivers. * See documentation of "x86_match_cpu" for details. */ /* * MODULE_DEVICE_TABLE expects this struct to be called x86cpu_device_id. * Although gcc seems to ignore this error, clang fails without this define. * * Note: The ordering of the struct is different from upstream because the * static initializers in kernels < 5.7 still use C89 style while upstream * has been converted to proper C99 initializers. */ #define x86cpu_device_id x86_cpu_id struct x86_cpu_id { __u16 vendor; __u16 family; __u16 model; __u16 feature; /* bit index */ kernel_ulong_t driver_data; __u16 steppings; }; /* Wild cards for x86_cpu_id::vendor, family, model and feature */ #define X86_VENDOR_ANY 0xffff #define X86_FAMILY_ANY 0 #define X86_MODEL_ANY 0 #define X86_STEPPING_ANY 0 #define X86_FEATURE_ANY 0 /* Same as FPU, you can't test for that */ /* * Generic table type for matching CPU features. * @feature: the bit number of the feature (0 - 65535) */ struct cpu_feature { __u16 feature; }; #define IPACK_ANY_FORMAT 0xff #define IPACK_ANY_ID (~0) struct ipack_device_id { __u8 format; /* Format version or IPACK_ANY_ID */ __u32 vendor; /* Vendor ID or IPACK_ANY_ID */ __u32 device; /* Device ID or IPACK_ANY_ID */ }; #define MEI_CL_MODULE_PREFIX "mei:" #define MEI_CL_NAME_SIZE 32 #define MEI_CL_VERSION_ANY 0xff /** * struct mei_cl_device_id - MEI client device identifier * @name: helper name * @uuid: client uuid * @version: client protocol version * @driver_info: information used by the driver. * * identifies mei client device by uuid and name */ struct mei_cl_device_id { char name[MEI_CL_NAME_SIZE]; uuid_le uuid; __u8 version; kernel_ulong_t driver_info; }; /* RapidIO */ #define RIO_ANY_ID 0xffff /** * struct rio_device_id - RIO device identifier * @did: RapidIO device ID * @vid: RapidIO vendor ID * @asm_did: RapidIO assembly device ID * @asm_vid: RapidIO assembly vendor ID * * Identifies a RapidIO device based on both the device/vendor IDs and * the assembly device/vendor IDs. */ struct rio_device_id { __u16 did, vid; __u16 asm_did, asm_vid; }; struct mcb_device_id { __u16 device; kernel_ulong_t driver_data; }; struct ulpi_device_id { __u16 vendor; __u16 product; kernel_ulong_t driver_data; }; /** * struct fsl_mc_device_id - MC object device identifier * @vendor: vendor ID * @obj_type: MC object type * * Type of entries in the "device Id" table for MC object devices supported by * a MC object device driver. The last entry of the table has vendor set to 0x0 */ struct fsl_mc_device_id { __u16 vendor; const char obj_type[16]; }; /** * struct tb_service_id - Thunderbolt service identifiers * @match_flags: Flags used to match the structure * @protocol_key: Protocol key the service supports * @protocol_id: Protocol id the service supports * @protocol_version: Version of the protocol * @protocol_revision: Revision of the protocol software * @driver_data: Driver specific data * * Thunderbolt XDomain services are exposed as devices where each device * carries the protocol information the service supports. Thunderbolt * XDomain service drivers match against that information. */ struct tb_service_id { __u32 match_flags; char protocol_key[8 + 1]; __u32 protocol_id; __u32 protocol_version; __u32 protocol_revision; kernel_ulong_t driver_data; }; #define TBSVC_MATCH_PROTOCOL_KEY 0x0001 #define TBSVC_MATCH_PROTOCOL_ID 0x0002 #define TBSVC_MATCH_PROTOCOL_VERSION 0x0004 #define TBSVC_MATCH_PROTOCOL_REVISION 0x0008 /* USB Type-C Alternate Modes */ #define TYPEC_ANY_MODE 0x7 /** * struct typec_device_id - USB Type-C alternate mode identifiers * @svid: Standard or Vendor ID * @mode: Mode index * @driver_data: Driver specific data */ struct typec_device_id { __u16 svid; __u8 mode; kernel_ulong_t driver_data; }; /** * struct tee_client_device_id - tee based device identifier * @uuid: For TEE based client devices we use the device uuid as * the identifier. */ struct tee_client_device_id { uuid_t uuid; }; /* WMI */ #define WMI_MODULE_PREFIX "wmi:" /** * struct wmi_device_id - WMI device identifier * @guid_string: 36 char string of the form fa50ff2b-f2e8-45de-83fa-65417f2f49ba * @context: pointer to driver specific data */ struct wmi_device_id { const char guid_string[UUID_STRING_LEN+1]; const void *context; }; #endif /* LINUX_MOD_DEVICETABLE_H */