D7net
Home
Console
Upload
information
Create File
Create Folder
About
Tools
:
/
snap
/
core24
/
current
/
lib
/
udev
/
rules.d
/
Filename :
71-nvidia.rules
back
Copy
# Tag the device as master-of-seat so that logind is happy # (see LP: #1365336) SUBSYSTEM=="pci", ATTRS{vendor}=="0x10de", DRIVERS=="nvidia", TAG+="seat", TAG+="master-of-seat" # Start and stop nvidia-persistenced on power on and power off # respectively ACTION=="add", DEVPATH=="/bus/pci/drivers/nvidia", TAG+="systemd", ENV{SYSTEMD_WANTS}="nvidia-persistenced.service" # Load and unload nvidia-modeset module ACTION=="add", DEVPATH=="/bus/pci/drivers/nvidia", RUN+="/sbin/modprobe nvidia-modeset" ACTION=="remove", DEVPATH=="/bus/pci/drivers/nvidia", RUN+="/sbin/modprobe -r nvidia-modeset" # Load and unload nvidia-drm module ACTION=="add", DEVPATH=="/bus/pci/drivers/nvidia", RUN+="/sbin/modprobe nvidia-drm" ACTION=="remove", DEVPATH=="/bus/pci/drivers/nvidia", RUN+="/sbin/modprobe -r nvidia-drm" # Load and unload nvidia-uvm module ACTION=="add", DEVPATH=="/bus/pci/drivers/nvidia", RUN+="/sbin/modprobe nvidia-uvm" ACTION=="remove", DEVPATH=="/bus/pci/drivers/nvidia", RUN+="/sbin/modprobe -r nvidia-uvm" # This will create the device nvidia device nodes ACTION=="add", DEVPATH=="/bus/pci/drivers/nvidia", RUN+="/sbin/ub-device-create" # Create the device node for the nvidia-uvm module ACTION=="add", DEVPATH=="/module/nvidia_uvm", SUBSYSTEM=="module", RUN+="/sbin/ub-device-create" # Enable runtime PM for NVIDIA VGA/3D controller devices ACTION=="bind", SUBSYSTEM=="pci", ATTR{vendor}=="0x10de", ATTR{class}=="0x03[0-9]*", TEST=="power/control", ATTR{power/control}="auto" # Enable runtime PM for NVIDIA Audio devices ACTION=="add", SUBSYSTEM=="pci", ATTR{vendor}=="0x10de", ATTR{class}=="0x040300", TEST=="power/control", ATTR{power/control}="auto" # Enable runtime PM for NVIDIA USB xHCI Host Controller devices ACTION=="add", SUBSYSTEM=="pci", ATTR{vendor}=="0x10de", ATTR{class}=="0x0c0330", TEST=="power/control", ATTR{power/control}="auto" # Enable runtime PM fo NVIDIA USB Type-C UCSI devices ACTION=="add", SUBSYSTEM=="pci", ATTR{vendor}=="0x10de", ATTR{class}=="0x0c8000", TEST=="power/control", ATTR{power/control}="auto"